Why Get Your Car Key Programmed?
Many people need their keys programmed for their cars. If you have kids that press the button too many times or you've lost your keys then the remotes need reprogramming.
Some auto locksmiths and dealerships have the tools needed to accomplish this task. They can also copy keys that are already in use in the event that it is possible.
Transponder Keys
Transponder keys can also be referred to as chip keys or smart key. Transponder keys contain an embedded microchip that can store and transmit information. This helps to prevent your vehicle being stolen. The microchip sends out an identification code every time the key in the ignition is turned. If the ID code matches that in the computer of your vehicle, the immobilizer will be disabled and your engine will begin to operate.
This is a better security measure when compared to a non-transponder keys, which do not include a chip and is not compatible with the anti-theft system of most modern cars. Transponder chips are being introduced to reduce car thefts. They have been an enormous success.
The transponder on the car key will light up when the key is put into the ignition. This small antenna, called an "inductive coil" is situated on the key. The transponder then sends out an radio frequency signal that contains the unique "password". This is transmitted to the anti-theft system of your vehicle. If the password is valid, the car will turn off the immobilizer, allowing you to start your vehicle.
If the password is incorrect, the immobilizer will remain active and the engine will not start. This is a great method to prevent car thieves because even if a duplicate key can be created, the criminal will not have the code to fool your vehicle into starting.
Transponder keys are not compatible with mechanical keys. These kinds of keys for cars work by physically moving the lock mechanisms on doors or the ignition cylinder itself, such as the VATS system of GM. (Vehicle Anti-Theft System) system that requires the right amount of resistance in order to turn the cylinder.
The non-transponder keys of the past can be copied by a locksmith, but the person who steals them will need to manually move the locks in order to start the engine and likely require a transponder key programming device to accomplish this. This is one of the main reasons that it is recommended to call a professional car locksmith such as Pop-A-Lock whenever you need a new transponder keys cut or a car key programmed.
Electronic Key Fobs
A key fob emits a signal to activate the locking system in your car, which allows you to unlock your door and get into your car. It can also control the alarm and trunk, depending on your model's features. The microchip on the fob sends out codes that are then processed by the receiver. The code corresponds to a specific frequency. If the reader detects this frequency, it will send a command to the lock.
If you're using a fob in an office environment they can be incorporated into a security system to add additional levels of protection. Fobs can be blocked immediately in the event of theft or loss, which is an added layer of security in a place where keys could drop off on a desk or be picked up by unauthorized individuals. Fobs are also cloned by creating copies that are not authorized to be floating around that have your security codes, leaving your car vulnerable to unauthorized access.
Fobs are extremely useful and can be used to unlock your doors without the need of a traditional key. The process of programming a fob requires some technical know-how however, it is not too difficult for an average person to do on their own. Fobs are typically programmed with a special software tool or following the instructions in the user manual of the vehicle.
The process of reprogramming your key fob is the same for all models, and you will often find detailed information about your particular model in the owner's manual or on the manufacturer's website. However it is important to note that these steps may not work for all models. If you have issues it may be worth consulting with your dealer or calling an locksmith.
Start by getting into your driver's seat, holding the key fob you wish to reprogram in your hands. Make sure your door is closed and that there are no other keys in the ignition. Press and hold the fob's lock for a few seconds until you hear the chime, or the sound of the locks cycling. This means you've entered the program mode. Then, repeat these steps to program additional fobs until all have been changed.
Enhanced Security
With transponder keys, car owners have another layer of security that isn't always present with traditional key fobs. Transponder keys are less likely to be stolen by thieves because the chip can only match the code to the immobilizer on your car. If it doesn't start, the vehicle won't start, making it more difficult to get.
Modern transponder keys do not contain a chip inside the lock, but instead in a special part of the key. When you insert your key into the ignition and turn it on, a radio signal is transmitted to the transponder. If the code is correct it will match the correct one in the immobilizer on your vehicle and the car will be allowed to begin. Modern keys need to be programmed correctly in order in order to function.
While it is possible to reprogram your own car keys, this process is extremely risky and should be left to experts. It's not common for a novice to attempt this and find that the key isn't working correctly or harms the immobilizer system inside your vehicle. A professional car locksmith or dealer will have a lot of experience in these types of situations and can help you out in the most efficient manner possible.
In addition, many advanced anti-theft devices rely on proper programming of your key to function properly. This means that you need to change your keys when they are lost or stolen to ensure that they will be unable to gain access to your vehicle.
The advantages of personalized key programming for motorists in Philadelphia include enhanced convenience and peace-of-mind. Nonstop Locksmith 24/7 can help you protect your vehicle against theft and unauthorized use. Contact them today to find out more about car key programming.
Getting Started
Car key programming, as the name suggests is the process of synchronising an authorized car key to the vehicle. This means that when the key is inserted it transmits an electronic serial number to the vehicle's onboard computer system which then allows the car to be unlocked. It is considered to be a helpful method to prevent theft of autos as if the car key isn't programmed correctly the key won't allow the car to start.
There are a variety of options for getting your keys programmed. One option is to go to your local dealer or manufacturer. These options can be costly and take a lot of time. You can also visit an auto locksmith. They will have all the tools and knowledge necessary to program any car key, whether it is the latest smart key or an older remote key. They will also be able to work quickly, which can be crucial in a situation of emergency.
Some people might decide to try and reprogramme their own car keys, but this is not an ideal idea. It's hard to determine which of the many methods available will actually work, and it's easy to make mistakes that can damage the car's onboard computer system. A lot of the tools used to reprogramme vehicles are expensive and sophisticated, making them difficult for the average person to use.
A stolen or lost car key might not be able to be reprogrammed, based on your vehicle. The original key has an embedded microchip that is linked to specific information about the vehicle. Reprogramming a key that was stolen or lost will not change any of the information it contains. The vehicle will therefore not recognize it as authorized.
If you're shopping for a new car, you should think about getting the transponder key programmed as soon as possible. This will ensure that your new car is as secure as possible and is a lot cheaper than replacing a stolen key.